Brand new just arrived. Smith & Wesson M&P Shield (No safety) in 45ACP. Comes with second magazine and lock.
Only $400.00
(Kenosha) M&P Shield - $ 400
↧
↧
(Alabama) S&W .32 DA 4th change - $ 350
Good day. I've got a classy pre-hand ejector Smith and Wesson. .32S&W caliber, serial in the 172xxx range, manufactured in the early 1890's. Mechanically excellent, original grips without chips or cracks. The cylinder is a replacement but is from a nickel .32 DA.
Sell for $350 or trade. Open to any trade offer, but would love to see a Savage in .30-06' or 6.5 Creedmoor, Axis is fine, prefer without Accutrigger actually. Also looking for an older running Jeep Cherokee, Grand Cherokee, or Comanche. If you have one and wanting to trade or do a partial trade for guns check my other listings too.
If the ad is up the item is available. Emails asking if the item is available or worded like it went through a translation from Farsi to Swahili to English will be ignored.
Sell for $350 or trade. Open to any trade offer, but would love to see a Savage in .30-06' or 6.5 Creedmoor, Axis is fine, prefer without Accutrigger actually. Also looking for an older running Jeep Cherokee, Grand Cherokee, or Comanche. If you have one and wanting to trade or do a partial trade for guns check my other listings too.
If the ad is up the item is available. Emails asking if the item is available or worded like it went through a translation from Farsi to Swahili to English will be ignored.
↧
(Alabama) S&W Model 10-5 - $ 350
S&W 10-5 .38 special. Nickel, 4" taper barrel, factory wood grips, standard catalog puts it at a 1972. Shoots great, nickel is worn in a couple of places, but internals are beautiful and the trigger is classic Smith. $350 cash OBO or possible trade. Meet with-in 35 miles of Andalusia.
For trading will consider about anything gun-wise, with cash on either end if necessary. Would be very interested in a Frommer Stop, shooter-grade Colt 1903, similar early .32ACP handgun, or pre-lock Smith .357. Also looking for an older running Jeep Cherokee, Grand Cherokee, or Comanche. If you have one and wanting to trade or do a partial trade for guns check my other listings too.
If the ad is up the item is available. Emails asking if the item is available or worded like it went through a translation from Farsi to Swahili to English will be ignored.
For trading will consider about anything gun-wise, with cash on either end if necessary. Would be very interested in a Frommer Stop, shooter-grade Colt 1903, similar early .32ACP handgun, or pre-lock Smith .357. Also looking for an older running Jeep Cherokee, Grand Cherokee, or Comanche. If you have one and wanting to trade or do a partial trade for guns check my other listings too.
If the ad is up the item is available. Emails asking if the item is available or worded like it went through a translation from Farsi to Swahili to English will be ignored.
↧
(Kenosha) M&P Shield - $ 400
Brand new in the box. Smith & Wesson M&P Shield 40S&W. Comes with two magazines, no safety.
Only $400.00
Only $400.00
↧
(Alabama) Chinese Type-24 Mauser - $ 350
Relisted because a deal fell through.
I've got an unmolested Chinese Type-24 8mm Mauser, the Chiang-Kai Shek rifle. Functionally a clone of the K98k's predecessor, the 1933 Standard Modell.
Rough, like most of them. In the interests of full disclosure, it's got a missing top handguard, the stock has a couple of cracks, and though the rifling looks serviceable the bore mics out way too worn to stabilize an 8mm. That said, the stock's not a lost cause and the action is good. It would make an excellent base for a project or restoration, or you could just get a handguard and hang it on the wall as a sample of a rather uncommon military Mauser.
Don't strictly need to get rid of it but my interest in the project is waning so I wanted to see what else might be out there. Would love to trade for another surplus bolt gun, even as a project gun. Specifically a Steyr straight pull in 8x56, a Carcano in 6.5x52, possibly a different mauser in any of the traditional military chamberings (7x57, 8x57, 7.65x53, .308, 6.5x55, asf). I'm also always looking for early .32ACP handguns and older Mossberg .22lr rifles. Will sell for $350.
Would also consider any of the following for a partial trade (or multiples):
German K98k stock.
K98k bayonet, original or reproduction.
Other K98k parts.
Finnish Mosin-Nagant m27 or m39 bayonet, original or reproduction.
Colt 1903 mags.
Mossberg M44US mags.
CZ-75 9mm mags.
Glock 9mm factory or magpul mags.
Diamondback DB9 mags.
Streamlight weapon lights.
AKM 7.62x39 mags/accessories/parts.
Factory loaded ammo in .32ACP, 9x19, 8x57, 7.62x39.
If you have something else in mind, lay it on me.
I've got an unmolested Chinese Type-24 8mm Mauser, the Chiang-Kai Shek rifle. Functionally a clone of the K98k's predecessor, the 1933 Standard Modell.
Rough, like most of them. In the interests of full disclosure, it's got a missing top handguard, the stock has a couple of cracks, and though the rifling looks serviceable the bore mics out way too worn to stabilize an 8mm. That said, the stock's not a lost cause and the action is good. It would make an excellent base for a project or restoration, or you could just get a handguard and hang it on the wall as a sample of a rather uncommon military Mauser.
Don't strictly need to get rid of it but my interest in the project is waning so I wanted to see what else might be out there. Would love to trade for another surplus bolt gun, even as a project gun. Specifically a Steyr straight pull in 8x56, a Carcano in 6.5x52, possibly a different mauser in any of the traditional military chamberings (7x57, 8x57, 7.65x53, .308, 6.5x55, asf). I'm also always looking for early .32ACP handguns and older Mossberg .22lr rifles. Will sell for $350.
Would also consider any of the following for a partial trade (or multiples):
German K98k stock.
K98k bayonet, original or reproduction.
Other K98k parts.
Finnish Mosin-Nagant m27 or m39 bayonet, original or reproduction.
Colt 1903 mags.
Mossberg M44US mags.
CZ-75 9mm mags.
Glock 9mm factory or magpul mags.
Diamondback DB9 mags.
Streamlight weapon lights.
AKM 7.62x39 mags/accessories/parts.
Factory loaded ammo in .32ACP, 9x19, 8x57, 7.62x39.
If you have something else in mind, lay it on me.
↧
↧
(Alabama) Winchester 37 20ga - $ 150
Old Steelbilt Winchester 37 in 20ga. Wood looks to have been replaced at some point, new buttstock wasn't fitted properly and you know what happens then. The major damage was repaired and it's been fired, holds up great. Barrel is rough but shootable and still keeps a pattern. Mechanically excellent.
Sell or trade. Will consider other project guns. Also looking for an older running Jeep Cherokee, Grand Cherokee, or Comanche. If you have one and wanting to trade or do a partial trade for guns check my other listings too.
If the ad is up the item is available. Emails asking if the item is available or worded like it went through a translation from Farsi to Swahili to English will be ignored.
Sell or trade. Will consider other project guns. Also looking for an older running Jeep Cherokee, Grand Cherokee, or Comanche. If you have one and wanting to trade or do a partial trade for guns check my other listings too.
If the ad is up the item is available. Emails asking if the item is available or worded like it went through a translation from Farsi to Swahili to English will be ignored.
↧
(St. Cloud) BCM M4 16" PACKAGE - $ 1,250
16" BCM M4 upper on spikes lower troy drop in rail aimpoint comp m2 colt cut down carry handle sight cardinal forged MAGPUL CTR, MIAD magpul QD sling, 13 pmag, case with 100+ rnds only 200 rds down it
text 320 290 118five,
PTC PTP required
text 320 290 118five,
PTC PTP required
↧
(Louisville) Custom AR-15 - Offer
There's been a lot of "custom" ar posts that are simply Palmetto state and anderson junk. But, I have a pretty high quality custom rifle I just finished building and test fired.
I do not have to trade or sell this so please don't come at me with low ball offers no matter if this is a buyers market or not. I know i probably won't get what i have into it.
this is a 6.2 pound light weight build.
Part list (optic not included unless specified)
Upper Parts
Receiver: Bootleg Inc w/ no forward assist or dust cover to help shed weight
Strike industries red extended latch charging handle
Nickle Boron Bolt Carrier Group
Fortis night 12.3" Rail
Ballistic Advantage premium 16" hanson 223 wylde barrel with gas block
VG6 gamma muzzle break
Aero precision mid length gas tube
MBUS flip sights (not pictured but have both front and rear)
Lower parts:
Spikes Tactical punisher w/ color filled receiver
CMMG builders kit
POF enhanced finger placement 4lb trigger with KNS non-rotation pins (red)
Seekins ambi safety
timber creek winterized and skeletonized trigger guard
2A titanium lightweight takedown pins
Odin works XMR3 extended mag release
Phase 5 skeletonized mag catch
MFT minimalist stock
Kaw Valley Precision buffer, spring and tube
Tyrant Designs Skeletonized red grip
If optics included It's a primary arms 1-6x24 scope (almost identical as the vortex strike eagle. same glass and made in same factory)
I do not have to trade or sell this so please don't come at me with low ball offers no matter if this is a buyers market or not. I know i probably won't get what i have into it.
this is a 6.2 pound light weight build.
Part list (optic not included unless specified)
Upper Parts
Receiver: Bootleg Inc w/ no forward assist or dust cover to help shed weight
Strike industries red extended latch charging handle
Nickle Boron Bolt Carrier Group
Fortis night 12.3" Rail
Ballistic Advantage premium 16" hanson 223 wylde barrel with gas block
VG6 gamma muzzle break
Aero precision mid length gas tube
MBUS flip sights (not pictured but have both front and rear)
Lower parts:
Spikes Tactical punisher w/ color filled receiver
CMMG builders kit
POF enhanced finger placement 4lb trigger with KNS non-rotation pins (red)
Seekins ambi safety
timber creek winterized and skeletonized trigger guard
2A titanium lightweight takedown pins
Odin works XMR3 extended mag release
Phase 5 skeletonized mag catch
MFT minimalist stock
Kaw Valley Precision buffer, spring and tube
Tyrant Designs Skeletonized red grip
If optics included It's a primary arms 1-6x24 scope (almost identical as the vortex strike eagle. same glass and made in same factory)
↧
(Wenatchee) LEUPOLD MOUNTS - $ 22
Used Leupold "std" Medium Extension Ring Set (.770) In Like New Condition With Slight Wear From Previous Mounting. Made Of High Quality Steel.
with Torx Screws And Torx Tool Included, Require Leupold Bases.
with Torx Screws And Torx Tool Included, Require Leupold Bases.
↧
↧
(Wenatchee) B SQUARE PICATINNY RISER - $ 27
B-square Picatinny Flattop Riser Mount, High Quality 3/4" See Thru Mount. Used In Excellent Condition With A Few Very Minor Use Marks.
↧
(Wenatchee) RCBS case trimmer - $ 60
RCBS Case Trimmer II in like new condition With three case holders to accept cartridges from 5.56/.223 rem up to .44 Case mouth pilots include .22, .24, .25, .27, .28, .30, .40, .44, .45 and up to 3.5 in in length. Comes with spare case trimmer cutter head. Extra pilots can be purchased for other calibers.
↧
(Wenatchee) MINI 14 SCOPE MOUNT - $ 50
B Square Mini-14 Mount, Used In Like New Condition With Very Minor Cosmetic Flaws, Attaches Via Bolt Hold Open Cover Plate Replacement, With 1' Scope Rings And Appropriate Allen Wrenches. Compare To New Price Of $60.00 + S&h
↧
(Wenatchee) AR-15 HANDGUARDS - $ 12
New Unused Mid-length (8.5") Ar-15 Piston Compatible Hand Guards
↧
↧
(Wenatchee) 34 BARETTA MAGAZINE - $ 40
Vintage factory original magazine for the Beretta 1934 pistol. This magazine is pre-war/wartime production. Magazine capacity is for seven 9mm Kurz (380 ACP) cartridges. Spring tension is strong and feed lips are free of damage. The Beretta 1934 was used by the Royal Italian army, the Romanian army and the German army.
↧
(Wenatchee) CAA GRIP LIGHT ADAPTOR - $ 45
NEW CAA GRIP LIGHT ADAPTOR, VERY HIGH QUALITY, Accommodates 1” push button end cap lights. High Density Polymer. Rubber pressure switch covers and inserts allow for customized pressure switch sizing. 1.5” Picatinny rail is included; attaches to either side, or bottom of mount, for the addition of a laser, waterproof storage compartment. Color is desert tan not black as in photo. PLEAST CONTACT WSTAN101@AOL.COM
↧
(New Hampshire) Spikes Tactical AR Pistol - $ 650
Price drop final price !
Spikes tactical Punisher lower , YHM Handguard , Magpul grip, CCMG Lower parts kit , Radical Firearms complete upper
Vortex Strikefire II red/green dot scope , Magpul front angled grip , Magpul rail Panels.
Traded for this pistol and just dont shoot it much, less then 100 rounds thru it. Looking to move to buy
new hunting rifle.
Spikes tactical Punisher lower , YHM Handguard , Magpul grip, CCMG Lower parts kit , Radical Firearms complete upper
Vortex Strikefire II red/green dot scope , Magpul front angled grip , Magpul rail Panels.
Traded for this pistol and just dont shoot it much, less then 100 rounds thru it. Looking to move to buy
new hunting rifle.
↧
(St. Louis) Labradar doppler chrono - $ 400
Like new Labradar doppler radar chronograph. Has the soft side case, memory card, small tripod, and external rechargeble battery pack. Will let it all go for $400. I spent $650 for everything. Ask for pics.
↧
↧
(Lima) Kimber .308 - $ 2,000
For sale is a Kimber Advanced Tactical .308 Win. It is unfired and comes in a pelican case. It came with a Manners Stock and Kimber garantees it to shoot sub MOA. The trigger is a two-stage, factory set at 4.5lbs. $2,000.00 OBO. Call or text 419-733-2599 if interested.
↧
(Reno) Kimber Montana 84L .270 - $ 850
Kimber Montana 84L .270. 3 rounds shoot throgh it. looks brand new, no box. Great backpacking gun. Nevada rez only. CCW first in line $850 please email if interested.
↧
(Sheboygan) Mak 90 Ak-47 - $ 900
Mak 90 ak-47 7.62x39
250 rounds fired.
no shipping
meet in Sheboygan.
250 rounds fired.
no shipping
meet in Sheboygan.
↧
More Pages to Explore .....
