Comes with Two 100rd Hellical Feed magzines. Face-to-Face, local deals only.
(Knoxville) Calico M-100P - $ 450
↧
↧
(Boise) Remington 700 5R - $ 1,700
this is an amazing rifle, I've been reaching 750yards with this set up and it's out performed what I'm capable of. I've got over $2,100 into this rife and only reason why I'm selling is to finish my ar build. I am only asking $1,700 for this. it's like new and only has 80 rounds through it. Text or call for more info. Trevor (208)313-1107 thanks!
↧
(Dallas) Raufoss 50 cal Buy on 1 or all. - $ 65
These are real Raufoss 50 cal rounds. Buy one or all for 65 each.
↧
(Louisville) Springfield Armory Socom 2 - $ 1,700
Well cared for. Comes with two mags and original box and paperwork.
Call or text to five o two 55three five 9 3 two
Call or text to five o two 55three five 9 3 two
↧
(Michigan) HK P30 9MM - $ 575
Heckler and Koch P30S 9mm V3 in like new condition.
Made in Germany.
HK did a limited run of the P30's in gray. The gray frame is solid thru and thru, just like the black. 100% HK factory OEM. You can check them out here:
https://www.omahaoutdoors.com/hk-m730903sgy-a5
Comes with everything as supplied new by HK (case, 2 magazines, spare side panels and back straps, mag loader, manual, lock, and HK sticker).
Asking $575
FTF in the Lapeer area. Form RI-60 and CPL or drivers license and purchase permit.
Made in Germany.
HK did a limited run of the P30's in gray. The gray frame is solid thru and thru, just like the black. 100% HK factory OEM. You can check them out here:
https://www.omahaoutdoors.com/hk-m730903sgy-a5
Comes with everything as supplied new by HK (case, 2 magazines, spare side panels and back straps, mag loader, manual, lock, and HK sticker).
Asking $575
FTF in the Lapeer area. Form RI-60 and CPL or drivers license and purchase permit.
↧
↧
(Winston Salem) Ruger precision rifle - $ 1,200
Ruger precision rifle chambered 6.5 creedmor never fired. Asking $1200 obo
↧
(Portland) 380 AUTO - $ 25
for sale or trade 380Auto ammo: 50rd.of SIG SAUER Elite Performance FMJ 100gr. ammo and 50rd.of HPR 90gr. JHP ammo
↧
(Dothan) Glock 42 (380) w trigger upgrade - $ 425
Used (1/2 box of ammo thru it) Glock 42 (380) with trigger work done. Ghost edge connector, overwatch
dat-2 trigger, and spring upgrades (just over $100 in trigger work) Much improved (less grainy pull, lighter pull-weight, and crisper release) trigger group action. Gun comes with original box, zippered carry case, 4 magazines, all factory paperwork and box-candy, and all the original trigger parts that were replaced. You must be Alabama resident, over 21, and preferably have a concealed carry permit. Sale will be face to face, and cash only. Willing to meet halfway within reasonable distance (Dothan, Enterprise, Troy, Andalusia, ect) Call, text or email... 334-494-7527. If ad is up, then gun is still for sale..!
dat-2 trigger, and spring upgrades (just over $100 in trigger work) Much improved (less grainy pull, lighter pull-weight, and crisper release) trigger group action. Gun comes with original box, zippered carry case, 4 magazines, all factory paperwork and box-candy, and all the original trigger parts that were replaced. You must be Alabama resident, over 21, and preferably have a concealed carry permit. Sale will be face to face, and cash only. Willing to meet halfway within reasonable distance (Dothan, Enterprise, Troy, Andalusia, ect) Call, text or email... 334-494-7527. If ad is up, then gun is still for sale..!
↧
(Dallas) Smith & Wesson model 60-3 .38 Special - $ 600
For Sale Or Trade plus Cash: S&W Model 60-3 .38 spl. Great condition, original grips, 5 shot revolver.
$600 Text 9zero3-474-1838
I'm located in Commerce & can meet within reason.
Face to face - No shipping - NO Paypal
$600 Text 9zero3-474-1838
I'm located in Commerce & can meet within reason.
Face to face - No shipping - NO Paypal
↧
↧
(Indianapolis) Kel-Tec RFB 18" Bullpup - $ 1,200
Original release RFB with VERY low serial number. I have never shot this rifle. It is in original box with all accessories and manual. Un-modified and in new condition.
I will only sell to Indiana residents with a valid LTCH and matching ID. If you do not have a LTCH, we can do an exchange through a LGS at the buyer's expense.
I am NOT interested in any trades.
I will only sell to Indiana residents with a valid LTCH and matching ID. If you do not have a LTCH, we can do an exchange through a LGS at the buyer's expense.
I am NOT interested in any trades.
↧
(Wisconsin) `Winchester Big Bore Model 94 XTR American Bald Eagle Commemorative Carbine, Blue & Gold 20" Lever Action Rifle & Box, MFD Ca. 1982 ATF C&R .375 Win. - $ 500
Winchester
Model: Model 94 Carbine Bald Eagle Commemorative
Serial Number: ABE 136
Year of Manufacture: Circa 1982; this rifle is on the ATF C&R list.
Caliber: .375 Win.
Action Type: Lever Action, Tubular Magazine Fed Rifle
Markings: The left side of the barrel is marked “WINCHESTER BIG BORE MODEL 94 XTR - 375 WIN. / MADE IN NEW HAVEN CONN. U.S.A. WINCHESTER PROOF STEEL". The right side of the barrel is marked "AMERICAN BALD EAGLE 1918". The Winchester Proof is on top of the chamber. The upper tang is marked ""MODEL 1894 / WINCHESTER". The lower tang is marked "Mfd. by U.S. Repeating Arms Co. / Winchester TM's licensed from / Olin Corporation". The serial number is on the underside of the frame. There si a lot of engraving and embellishment throughout.
Barrel Length: 20”
Sights / Optics: The front sight is a beaded blade, dovetailed onto a ramp base with a blue sight hood, the ramp is fixed to the barrel. The rear sight is a Full Buckhorn notched leaf on a slide-step elevator, which is dovetailed onto the barrel.
Stock Configuration & Condition: The stocks are checkered oiled wood with nice fit to the metal items. The forend is set with a barrel band and there is a coin set into the right side of the stock. Only storage wear is evident on the wood and the checkering remains very sharp. The LOP measures 13 1/4” from the front of the trigger to the back of the butt plate which has no wear to speak of. The stocks rate in about Excellent overall condition.
Type of Finish: Blue & Gold Plate
Finish Originality: All Original
Bore Condition: The bore is bright and the rifling is sharp. There is no erosion.
Overall Condition: This rifle retains about 99% of its metal finish. The balance of the finish shows only the lightest of handling/storage marks - nothing worth singling out. `
Buyer to pay $25 for shipping
Model: Model 94 Carbine Bald Eagle Commemorative
Serial Number: ABE 136
Year of Manufacture: Circa 1982; this rifle is on the ATF C&R list.
Caliber: .375 Win.
Action Type: Lever Action, Tubular Magazine Fed Rifle
Markings: The left side of the barrel is marked “WINCHESTER BIG BORE MODEL 94 XTR - 375 WIN. / MADE IN NEW HAVEN CONN. U.S.A. WINCHESTER PROOF STEEL". The right side of the barrel is marked "AMERICAN BALD EAGLE 1918". The Winchester Proof is on top of the chamber. The upper tang is marked ""MODEL 1894 / WINCHESTER". The lower tang is marked "Mfd. by U.S. Repeating Arms Co. / Winchester TM's licensed from / Olin Corporation". The serial number is on the underside of the frame. There si a lot of engraving and embellishment throughout.
Barrel Length: 20”
Sights / Optics: The front sight is a beaded blade, dovetailed onto a ramp base with a blue sight hood, the ramp is fixed to the barrel. The rear sight is a Full Buckhorn notched leaf on a slide-step elevator, which is dovetailed onto the barrel.
Stock Configuration & Condition: The stocks are checkered oiled wood with nice fit to the metal items. The forend is set with a barrel band and there is a coin set into the right side of the stock. Only storage wear is evident on the wood and the checkering remains very sharp. The LOP measures 13 1/4” from the front of the trigger to the back of the butt plate which has no wear to speak of. The stocks rate in about Excellent overall condition.
Type of Finish: Blue & Gold Plate
Finish Originality: All Original
Bore Condition: The bore is bright and the rifling is sharp. There is no erosion.
Overall Condition: This rifle retains about 99% of its metal finish. The balance of the finish shows only the lightest of handling/storage marks - nothing worth singling out. `
Buyer to pay $25 for shipping
↧
(Los Angeles) Ruger LCR 357/38 - $ 450
Practically Brand new LCR. Includes original zipper bag and a Blackhawk pocket holster.
↧
(Madison) Springfield XDm 5.25 .45 With Extras - $ 1
Springfield XDm 5.25 competition model in .45acp. Comes with all of the original parts and pieces and factory case. Mags are all 13 round, and it comes with 3 extra factory mags new in the box.
A powder river drop in trigger has been installed (very nice light trigger) (I have all of the original pieces also). It also has a talon grip installed.
It is in excellent condition, no marks or scrapes. I've probably only put about 500-600 rounds through it. I bought something different and just don't use this much at all.
Would consider a glock 17/19 (gen 3 or 4), or a full size M&P in 9mm in trade.
Price for everything $625. Trigger is about $110 new, and mags are 27/each. So the extras new value at $191. I would sell the pistol w/o the additional mags and trigger for $500.
If you want to purchase this, I will only sell if it goes through an FFL for a transfer, no exceptions.
A powder river drop in trigger has been installed (very nice light trigger) (I have all of the original pieces also). It also has a talon grip installed.
It is in excellent condition, no marks or scrapes. I've probably only put about 500-600 rounds through it. I bought something different and just don't use this much at all.
Would consider a glock 17/19 (gen 3 or 4), or a full size M&P in 9mm in trade.
Price for everything $625. Trigger is about $110 new, and mags are 27/each. So the extras new value at $191. I would sell the pistol w/o the additional mags and trigger for $500.
If you want to purchase this, I will only sell if it goes through an FFL for a transfer, no exceptions.
↧
↧
(Southern Illinois) 600rds of Federal Independence .357 Magnum 158gr JSP ammo w/ .50 cal ammo can. - $ 280
I have 600rds of Federal Independence .357 Magnum 158gr JSP ammo. It is Brass cased boxer primed ammo. This is New Factory ammo. I sold my .357 mag pistol I had & this is some of the ammo I had left. All 600rds with military style .50 cal ammo can included. Selling for-$280.00 Cash. My price is Firm at-$280.00 Cash. I will not take any less for it. No trade offers please. Cash only! If your interested you can Call or Text me at-618-780-0882. Please No Emails, I don't answer many emails anymore. Thanks for looking!
↧
(Topeka) Olympic arms ar15 - $ 600
Selling because I need the cash
from back to front
6 position adjustable Milspec stock
standard Olympic multi cal lower
standard pistol grip
standard mil spec trigger
SAA milspec flattop upper receiver
standard milspec charging handle
magpul mbus rear sight
heavy 16 inch .223/5.56 barrel
quad rail
forward grip
milspec front sight post
a2 birdcage flash hider
includes one magazine.
Its a great gun and is very reliable I wish I did not have to get rid of it.
from back to front
6 position adjustable Milspec stock
standard Olympic multi cal lower
standard pistol grip
standard mil spec trigger
SAA milspec flattop upper receiver
standard milspec charging handle
magpul mbus rear sight
heavy 16 inch .223/5.56 barrel
quad rail
forward grip
milspec front sight post
a2 birdcage flash hider
includes one magazine.
Its a great gun and is very reliable I wish I did not have to get rid of it.
↧
(Indianapolis) 500 Rounds, 5.56x45 Federal - 55gr FMJ-BT NATO chambered - $ 205
-35 units available-
Send a message through Armslist to discuss shipping and payment options.
Send a message through Armslist to discuss shipping and payment options.
↧
(Springfield) Custom Police Magnum 12 ga. home defense pump shotgun NIB (LAST ONE!) - $ 450
EDIT: Price reduced due to a couple of small cosmetic safe scratches on the finish of the mag extension and near the end of the barrel. Offering this for less than the build cost. If it doesn't sell or get traded this week, I will have it Cerakoted.
OR if you would like it Cerakoted in the color of your choice, let me know and I will do it for $625 total cash price or equivalent trade. Gun is still new and unfired. I have 2 of my own and built several others to sell/trade. This is the last one.
I have available a highly customized IAC Hawk (Norinco Remington 870 clone) 12 gauge shotgun chambered in 3" magnum. 18.5" cylinder bore barrel. New and unfired.
Included features are listed below:
Full internal 870 Police Magnum upgrade, 7+1 capacity (with 2 3/4" shells), and a ton of extra custom features.
- see-through picatinny rail mount on receiver
- Hogue shortshot Overmold rubber 12" LOP stock and forend
- Vang Components Big Speed Safety
- Vang Components Stainless Steel Magazine follower
- Wolff XP Magazine spring for reliable feeding and ejection
- +2 flush with barrel magazine tube extension from Blunderbuss Technologies
- 870 Police XP firing pin spring
- 870 Police carrier dog follower spring
- 870 Police heavy sear spring
- TacStar Slimline 6 round side saddle shell carrier
- Spectre Gear 5 round buttstock shell carrier
- ATI Halo 2 heat shield w/ built-in ghost ring sights
- ACME Machine picatinny 5 position magazine tube mount for flashlights and accessories
These IAC Hawk shotguns are very nice right out of the box and all the upgrades I've added make it much better. This is a BETTER shotgun out of the box than a Remington 870 Express. It comes stock with solid steel receiver, a milled steel extractor (unlike the MIM extractor in the 870 Express), steel trigger guard (Express is plastic and even the 870P is aluminum), and a tough parkerized finish just like the much more costly 870P. All 870 parts except barrels (which require a spacer) are fully interchangeable with these guns.
As illustrated in the picture, I have taken the time to press the magazine tube detents out flat instead of drilling them, so there are NO HOLES in the tube for dirt and debris to find their way into the action.
$450 cash. It cost me about $500 plus labor to put this gun together, so the price is firm.
Mainly looking for cash but will consider trades.
Call or text anytime 417-393-6359. Please leave a message if no answer. Check out my other listings to see what else I have available. Thanks!
OR if you would like it Cerakoted in the color of your choice, let me know and I will do it for $625 total cash price or equivalent trade. Gun is still new and unfired. I have 2 of my own and built several others to sell/trade. This is the last one.
I have available a highly customized IAC Hawk (Norinco Remington 870 clone) 12 gauge shotgun chambered in 3" magnum. 18.5" cylinder bore barrel. New and unfired.
Included features are listed below:
Full internal 870 Police Magnum upgrade, 7+1 capacity (with 2 3/4" shells), and a ton of extra custom features.
- see-through picatinny rail mount on receiver
- Hogue shortshot Overmold rubber 12" LOP stock and forend
- Vang Components Big Speed Safety
- Vang Components Stainless Steel Magazine follower
- Wolff XP Magazine spring for reliable feeding and ejection
- +2 flush with barrel magazine tube extension from Blunderbuss Technologies
- 870 Police XP firing pin spring
- 870 Police carrier dog follower spring
- 870 Police heavy sear spring
- TacStar Slimline 6 round side saddle shell carrier
- Spectre Gear 5 round buttstock shell carrier
- ATI Halo 2 heat shield w/ built-in ghost ring sights
- ACME Machine picatinny 5 position magazine tube mount for flashlights and accessories
These IAC Hawk shotguns are very nice right out of the box and all the upgrades I've added make it much better. This is a BETTER shotgun out of the box than a Remington 870 Express. It comes stock with solid steel receiver, a milled steel extractor (unlike the MIM extractor in the 870 Express), steel trigger guard (Express is plastic and even the 870P is aluminum), and a tough parkerized finish just like the much more costly 870P. All 870 parts except barrels (which require a spacer) are fully interchangeable with these guns.
As illustrated in the picture, I have taken the time to press the magazine tube detents out flat instead of drilling them, so there are NO HOLES in the tube for dirt and debris to find their way into the action.
$450 cash. It cost me about $500 plus labor to put this gun together, so the price is firm.
Mainly looking for cash but will consider trades.
Call or text anytime 417-393-6359. Please leave a message if no answer. Check out my other listings to see what else I have available. Thanks!
↧
↧
(Jacksonville) Custom Bullberry 308 pistol barrel for T/C Encore - Offer
For your consideration is a Pistol Barrel chambered in 308 Win. It is made by Bullberry Barrel Works Ltd. and made to fit a Thompson Center Arms Encore pistol.
The barrel is a full one inch in diameter. And approx. 9 1/2 inches long.
It includes the walnut forend (and hanger), along with the scope mount, as pictured.
The barrrel is in Excellent condition with only the normal handling marks, the beautiful wood does have a few marks on it.
I may consider nearly any unique trades,
and perhaps a Glock pistol or NAA mini revolver.
I can't think of many guns I don't like!
Maybe multiple trades, so Offer Up, worse thing can happen is I say No Thanks!
Cash price $399 or best reasonable offer.
I am located in Duplin County, willing to meet within about a 30 minute drive of home for the right deal.
Please check my other listings for more items of interest.
Thank You!
The barrel is a full one inch in diameter. And approx. 9 1/2 inches long.
It includes the walnut forend (and hanger), along with the scope mount, as pictured.
The barrrel is in Excellent condition with only the normal handling marks, the beautiful wood does have a few marks on it.
I may consider nearly any unique trades,
and perhaps a Glock pistol or NAA mini revolver.
I can't think of many guns I don't like!
Maybe multiple trades, so Offer Up, worse thing can happen is I say No Thanks!
Cash price $399 or best reasonable offer.
I am located in Duplin County, willing to meet within about a 30 minute drive of home for the right deal.
Please check my other listings for more items of interest.
Thank You!
↧
(Springfield) lots of various parts for Remington 870 12 gauge shotguns. Stocks, springs, pins, & more. - Offer
I have loads of factory take off parts for Remington 870, IAC Hawk, or Pardner Pump shotguns including 5 or 6 synthetic stock and forend sets, magazine springs, sear springs, carrier dog follower springs, firing pin springs, pins, followers, stock bolts, washers, & many other odds & ends. If you need it, there's a good chance I have it. Very reasonable prices on everything. Trades welcome- ammo, old guns, accesories, etc.
Call or text anytime 417-393'6359. Leave message if no answer. Also please check out my other listings to see what else I have available. Thanks!
Call or text anytime 417-393'6359. Leave message if no answer. Also please check out my other listings to see what else I have available. Thanks!
↧
(Massachusetts) Mossberg MMR Carbine 5.56 NATO - Offer
Wanted to buy a Mossberg MMR AR rifle in .223. Very serious.
↧
More Pages to Explore .....
