(St. Louis) Bulgarian Makarov PM 9x18 - $ 325

June 14, 2016, 9:08 pm

≫ Next: (St. Louis) Mossberg 500 - $ 325

≪ Previous: (Miami-Dade) Russian AK47/74 slings - $ 15

1989 Bulgarian Makarov with 2 magazines. Also included is approx 200 rounds of various FMJ and 50 rounds of HP.

Buyer must have valid FOID and follow all IL laws for transaction.

↧

(St. Louis) Mossberg 500 - $ 325

June 14, 2016, 9:08 pm

≫ Next: (Tucson) DS Arms SA58 FAL - $ 1,400

≪ Previous: (St. Louis) Bulgarian Makarov PM 9x18 - $ 325

Mossberg 500 20" barrel holds 7+1 magazine. Included all original documents and box. Also has optional pistol grip. I replaced the factory plastic safety switch with metal version. Bought in October of 2015 and decided it's not the gun for me. Comes with 30 rounds of 00 buck and 1 box of slugs and Otis boresnake. Mainly looking for cash but interesting trades may be considered.

↧

(Tucson) DS Arms SA58 FAL - $ 1,400

June 14, 2016, 9:09 pm

≫ Next: (Michigan) Colt Cylinder Scene Plates - $ 1,000

≪ Previous: (St. Louis) Mossberg 500 - $ 325

DS Arms SA58 FAL. This has an 18-inch barrel and a DSA picatinny top cover. Comes with case, orignal sheet-metal top-cover and 2 new-manufacture 20-round magazines. The armorers tools (front sight elevation, gas adjustment wrench, op-spring removal tool, and extractor-removal tool) are sold separately.

Rifle, case and 2 magazines: $1,400
Armorers tools: $100 for the whole set
FAL Magazines (5): $15/each, except the rusty one, which I'll let go for $5.

↧

(Michigan) Colt Cylinder Scene Plates - $ 1,000

June 14, 2016, 9:09 pm

≫ Next: (Seattle) BCM Haley strategic Jack rifle custom - $ 2,000

≪ Previous: (Tucson) DS Arms SA58 FAL - $ 1,400

Colt cylinder Scene Plates. 3 plates and a 1 plague. I don't know when these were made. There old and in great shape. I've talked to alot people about the plates not a whole lot of info them. I think there a marketing thing, or maybe a memorial. there in great shape. I'm not shipping, I'm in Michigan

1000 obo

↧

(Seattle) BCM Haley strategic Jack rifle custom - $ 2,000

June 14, 2016, 9:09 pm

≫ Next: (Michigan) srh toklat - $ 900

≪ Previous: (Michigan) Colt Cylinder Scene Plates - $ 1,000

I have a custom BCM Haley Strategic "Jack carbine". Rifle has about 1k rounds on it (guessing high) small wear marks as normal. It is "custom" you can say because I have changed/ added a few imporoved parts to the rifle which I believe should of came on it to begin with, they are: Upgraded the original 10" Geissele SMR MK1 mod 1 to a 13" Geissle SMR MK8 Mlok rail cerakoted to match. Battle Arms ambi selectors. VG6 Precison epsilon brake that was pinned and welded to barrel instead of the BCM comp. Seekins enhanced mag release. Seekins enhanced bolt release. Changed grip to a BCM mod 2 with interchangeable back straps Haley Strategic Partners - The Jack Carbine Package Includes: HSP Logo Laser Etched on Magwell and Upper Receiver Joint Forces Enterprises Applied HSP Disruptive Gray Cerakote Impact Weapons Components Thorntail Mount Inforce WML-HSP Features: BCMGUNFIGHTER Mod 4 Charging Handle 11595E Barrels 14.5" Mid Length Gas System Permanently Installed BCMGUNFIGHTER Comp Mod 1 M4 Feed Ramp Barrel Extension M4 Feed Ramp Flat Top Receiver USGI 5.56mm NATO Chambers Independently Certified Mil-Spec 11595E Barrel Steel Chrome Lined Bore and Chamber Manganese Phosphate Barrel Finish on entire barrel USGI Government Profile Barrels HPT (High Pressure Test, per Milspec) Barrels MPI (Magnetic Particle Inspected, per Milspec) Barrels Bolt machined from Mil-Spec Carpenter No. 158 steel HPT Bolt (High Pressure Tested/ Proof) MPI Bolt (Magnetic Particle Inspected) Shot Peened Bolt Chrome Lined Carrier (AUTO) Chrome Lined Gas Key Gas Key Hardened to USGI Specifications Grade 8 Hardened Fasteners Key Staked Per Mil-Spec Tool Steel Extractor BCM Extractor Spring Black Extractor Insert Receivers Machined from Aluminum Forgings 7075-T6 Receivers Hardcoat Anodize per MIL-A-8625F, Type III, Class 2 BCM Milspec 7075-T6 Receiver Extension B5 Systems SOPMOD Bravo Milspec Stock with Staked M4 Lock Nut USGI H Buffer (1 USGI Tungsten, 2 Steel) Low Shelf for RDIAS installation Low Shelf for Accuwedge use Un-notched Hammer compatible with 9mm and HK416 use Fire Controls marked SAFE and SEMI Rifle will come with the original ALG defense ACT trigger installed. ***will not come with the Aimpoint T1 in picture.*** This rifle sells for $2,195 in standard configuration. With the added parts it comes to $2700 asking $2000 firm Possible trade for a SCAR 16s

↧

(Michigan) srh toklat - $ 900

June 14, 2016, 9:09 pm

≫ Next: (Iowa) Weatherby .25-06 - $ 500

≪ Previous: (Seattle) BCM Haley strategic Jack rifle custom - $ 2,000

I have a super redhawk 454 toklat with 5" barrel. its ne never fired or even loaded. it has the box and extra sight scope rings. everything from the factory. bought it a week or two ago, thought i need it but I don't. asking 900 obo

↧

(Iowa) Weatherby .25-06 - $ 500

June 14, 2016, 9:10 pm

≫ Next: (Portland) 348 winchester super - $ 200

≪ Previous: (Michigan) srh toklat - $ 900

Never fired weatherby vangaurd sporter with a beautiful walnut and rosewood stock. I got the gun for a hunting trip that never happened and it's just been in my safe since then. Also included is rings but no scope and 50 rounds of hand load ammo with 75gr Vmax bullets. Retails for $800 selling for $500

641-777-5549

↧

(Portland) 348 winchester super - $ 200

June 14, 2016, 9:10 pm

≫ Next: (Tampa/St. Pete) XDS 3.3 9mm Bi-Tone - $ 500

≪ Previous: (Iowa) Weatherby .25-06 - $ 500

I have 100 rnds of 348 winchester super ammo in a case ready to be fired. Going price on the market is 3 dollars a round i am asking 2$ a round to the first person with the cash. if interested text me at 360-513-6790. Have a great day.

↧

(Tampa/St. Pete) XDS 3.3 9mm Bi-Tone - $ 500

June 14, 2016, 9:12 pm

≫ Next: (Albuquerque) TWO MINI-14 RIFLE HIGH-CAPACITY MAGAZINES - CLIPS, MAGS - 30 & 20 ROUND - $ 18

≪ Previous: (Portland) 348 winchester super - $ 200

Great little carry gun but im looking to move towards glock in my inventory, gun come with three mags two pinky extenstions iwb blade tech holster and carry case

↧

(Albuquerque) TWO MINI-14 RIFLE HIGH-CAPACITY MAGAZINES - CLIPS, MAGS - 30 & 20 ROUND - $ 18

June 14, 2016, 9:13 pm

≫ Next: (Oregon Coast) Rem 700 - $ 700

≪ Previous: (Tampa/St. Pete) XDS 3.3 9mm Bi-Tone - $ 500

Two Mini-14 high-cap magazines. Metal. Used. One 30 round magazine and one 20 round magazine. I don't know what the brands are, neither are marked. (Neither appear to be pinned/limited.) The 30 round mag is in very good condition. And the 20 round magazine is otherwise excellent but has a small round chip taken out of its bottom/base plate, which is plastic even though the rest of the magazine is metal; it's small and does not penetrate all the way through and won't interfere with its operation. New Mexico buyers / Local pick-up only please. Thanks!

↧

(Oregon Coast) Rem 700 - $ 700

June 15, 2016, 9:13 pm

≫ Next: (St. Louis) 2 bags of 38 special brass - tumbled clean (500 per bag) - $ 25

≪ Previous: (Albuquerque) TWO MINI-14 RIFLE HIGH-CAPACITY MAGAZINES - CLIPS, MAGS - 30 & 20 ROUND - $ 18

I have a Remington 700 LSS .300 rem ultra mag(RUM). Not scope but comes with rings. Has little scratches and dents in stock. $700 or best offer. I can throw in a older Leupold 3-9x40 vx2 for $850. Also have beretta px4 Storm 40sw for $400.
Glock 26 2.5 for $375.
smith and Wesson model 63-3 2inch stainless 22lr for $850.

↧

(St. Louis) 2 bags of 38 special brass - tumbled clean (500 per bag) - $ 25

June 15, 2016, 9:13 pm

≫ Next: (St. Louis) 40 caliber brass tumbled clean 1k cases - $ 35

≪ Previous: (Oregon Coast) Rem 700 - $ 700

2 bags of 38 special (500 per bag) for $25 bag or $45 for both. Mixed headstamps with a mix of Federal, Winchester, Sellier and Bellot, CBC, PMC, Precision and Herters also a few nickel scattered in the lots. Will ship if you cover shipping

↧